About: my rear running lights don't work on my 94 jeep grand Cherokee Laredo v6

my rear running lights don't work on my 94 jeep grand Cherokee Laredo v6?
type 94 Grand Cherokee Laredo , 4.0, V6, ZJ. It happened about 3 days ago where a person passing me on the road yell in my window as i was driving home "your back lights are out". i pulled over to check. i saw that in fact they weren't on. 1. i checked the bulbs ( brand new ) 2. i checked the fuses (all fine) here's the kicker, when i hit the brakes the 2 top tail brake lights work and so does the one on the top of the rear hatch. now i know there are 3 bulbs in each light assembly unit. both driver and passenger side same to diagram below. --------- | o | brake light - (works) --------- | o | running light - (doesn't work) --------- | o | white backup light - (works) --------- please help
Jeep - 1 Answers
Random Answers, Critics, Comments, Opinions :
1 :
If I recall correctly your jeep has the pull out style knob for the headlights right? If so I would check the wire connections at the back of this switch and also the connections at the tail light sockets. Often times the wire either frays or just simply rusts off its connector. Bottom line is that if the other lights work and the fuse isn't blown your problem is with the wire somewhere between the switch and the lamp. Good luck.
Read more other entries :
About: how do i move to laredo from eagle pass? wi...
About: 2000 Jeep Grand Cherokee laredo 4x4 Do not ...

About: 1997 jeep grand cherokee laredo lift kit,

1997 jeep grand cherokee laredo lift kit,?
i have a 97' jeep grand cherokee laredo.and im looking for a body lift for it.i can find them for "grand cherokee's" but i dont know if the same one will work with the laredo, i know the differences in the two but just to make sure before i spend my money i would like to know for sure if it would work???
Jeep - 3 Answers
Random Answers, Critics, Comments, Opinions :
1 :
The problem with a Grand Cherokee is that it is a unibody, meaning that the body IS the frame. A body lift works by putting a spacer between the frame and body of a truck that has a conventional frame, thus lifting the body off the frame. This is impossible with a unibody truck like the Grand Cherokee. You HAVE to get a more expensive suspension lift.
2 :
The grand cherokee is a unibody and cant have a body lift. There is no difference between grand cherokee models. Any lift will work on a grand. You could go with a coil spacer lift or a more expensive full lift kit.
3 :
well i am not going to beat a dead horse and say what they said, but they are correct. i got my 3 inch pro comp suspension lift out the door for under 1000 at 4 wheel parts just outside of san diego. get you a 3 inch lift with some 31s and you will be set. i have also run 32s with some trimming, BUT i wouldn't suggest it for a heavy mudder. those zj's have really weak axles dana 30 in the front and 35 in the back so they wouldn't last long.
Read more other entries :
About: how do i move to laredo from eagle pass? wi...
About: 2000 Jeep Grand Cherokee laredo 4x4 Do not ...