I have a 1995 Grand Cherokee Laredo. The radio intermitently comes on and plays and other times it doesn't.?
In other words, sometimes it works and sometimes it doesn't. So I know the amp still works because I get sound. And when the antennae does not come up I get no sound, when it goes up I get sound.
Car Audio - 1 Answers
Random Answers, Critics, Comments, Opinions :
1 :
If it is an aftermarket radio, pull it out of the dash and check your power and ground wires. If its factory , pull the radio fuses ( clock memory/constant - sometimes dome light fuse and ignition- radio fuse) and plug them back in . The fuses can sometimes go bad.
Read more other entries :
About: my rear running lights don't work on my 94 ...
About: 1997 jeep grand cherokee laredo lift kit,
Monday, April 23, 2012
Friday, April 13, 2012
About: why wont my clutch not work in my jeep
why wont my clutch not work in my jeep?
my clutch in my 88 jeep cherokee Laredo will not fully engage while my foot is down to the floor . i just replaced the whole clutch System, slave, master, and clutch plate. please help. thanks mike
Maintenance & Repairs - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
I don't understand your question, when you foot/pedal is down to the floor, the clutch is fully disengaged. It engages when you release the pedal about 1/2 way. If you meant to say that it won't disengage so you can shift, then may be some more air needs to be bled out. Have some one look at the clutch fork while you push the pedal down, if the slave cylinder does not move the fork then there is something wrong with the hydraulic system, check linkages hook-up, made sure fittings not leaking, possible air in system. If the fork moves full travel, then something wrong internally.
2 :
I have to agree with Chris, air in the system or low fluid Pedal adjustment Pressure plate has weak springs
Read more other entries :
About: my rear running lights don't work on my 94 ...
About: 1997 jeep grand cherokee laredo lift kit,
my clutch in my 88 jeep cherokee Laredo will not fully engage while my foot is down to the floor . i just replaced the whole clutch System, slave, master, and clutch plate. please help. thanks mike
Maintenance & Repairs - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
I don't understand your question, when you foot/pedal is down to the floor, the clutch is fully disengaged. It engages when you release the pedal about 1/2 way. If you meant to say that it won't disengage so you can shift, then may be some more air needs to be bled out. Have some one look at the clutch fork while you push the pedal down, if the slave cylinder does not move the fork then there is something wrong with the hydraulic system, check linkages hook-up, made sure fittings not leaking, possible air in system. If the fork moves full travel, then something wrong internally.
2 :
I have to agree with Chris, air in the system or low fluid Pedal adjustment Pressure plate has weak springs
Read more other entries :
About: my rear running lights don't work on my 94 ...
About: 1997 jeep grand cherokee laredo lift kit,
Subscribe to:
Posts (Atom)