why wont my clutch not work in my jeep?
my clutch in my 88 jeep cherokee Laredo will not fully engage while my foot is down to the floor . i just replaced the whole clutch System, slave, master, and clutch plate. please help. thanks mike
Maintenance & Repairs - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
I don't understand your question, when you foot/pedal is down to the floor, the clutch is fully disengaged. It engages when you release the pedal about 1/2 way. If you meant to say that it won't disengage so you can shift, then may be some more air needs to be bled out. Have some one look at the clutch fork while you push the pedal down, if the slave cylinder does not move the fork then there is something wrong with the hydraulic system, check linkages hook-up, made sure fittings not leaking, possible air in system. If the fork moves full travel, then something wrong internally.
2 :
I have to agree with Chris, air in the system or low fluid Pedal adjustment Pressure plate has weak springs
Read more other entries :
About: my rear running lights don't work on my 94 ...
About: 1997 jeep grand cherokee laredo lift kit,
