1999 jeep grand cherokee laredo after market stereo wont work?
okay so im replacing the stock stereo with a kenwood KDC-MP442U , i got the correct wiring harness's and used the correct wire connectors and everything, but when everything is hooked up and i go to turn my car on, the head unit doesnt turn on, but when i take the 2 red power wires and put a yellow memory wire, the deck turns on, but it stays on when the car is off. all of the wires are correctly matched up, and crimped down and connected properly when i had this deck in my 1996 jeep cherokee sport it worked normally what am i doing wrong, why is this deck not functioning correctly?
Car Audio - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
not working because you didn't connect the blue wire, you need to use that wire for the infinity amplifier, that is the remote turn on wire i believe it is white or brown it will be the only wire lose besides the ilumintaion good luck
2 :
You have a fuse that is blown not the amp turning on.. There are 2 power wires for a radio one is yellow and that gets power directly from the battery and the other is the red which only gets power from the key switch so it only gets power when the car is on. There is a fuse panel in the drivers kick it might not say radio it might be connected to a Cig lighter or dome light.. but if you change that you'll solve your problem
Read more other entries :
About: my rear running lights don't work on my 94 ...
About: 1997 jeep grand cherokee laredo lift kit,
